Noria Strata
Blog / guides

Density and specific weight of stone: marble, granite, limestone

Abstract
Granite has an apparent density of 2,590–2,670 kg/m³ (about 162–167 lb/ft³) in the test reports cited here. Calcitic marble is about 2,710 kg/m³, dolomitic marble about 2,840, limestones 2,310–2,690, travertine about 1,900–2,500. It explains EN 1936 and ASTM C97, lists 20 named stones, and shows how density sets dry block and slab mass, payloads and price per tonne.
Marble and stone samples laid side by side, showing colour and veining differences
Contents
  1. 1The short answer
  2. 2Density, specific gravity, specific weight: the terms
  3. 3How density is measured: EN 1936 and ASTM C97
  4. 4Density of granite, marble and other stone types
  5. 5Declared density of named commercial stones
  6. 6Why density matters in the trade
  7. 7Frequently Asked Questions

At a glance

  • Granite has an apparent density of 2,590–2,670 kg/m³ (about 162–167 lb/ft³) in the test reports cited here10,22; two dark stones sold as «black granite», a diorite and a diabase, test at 2,980 and 3,08025,26.
  • The cited calcitic marbles test at 2,694–2,714 kg/m³; the dolomitic Greek whites at 2,825–2,848, and Thassos White at 2,8404,5,7.
  • The cited limestones span 2,310–2,690 kg/m³ and report 0.36–12.3 % open porosity; travertine spans about 1,900–2,500 kg/m³10,11,14,34.
  • A 3 cm slab of a 2,650 kg/m³ granite has a dry mass of 79.5 kg per square metre: thickness × density (worked example).

The short answer

Granite has an apparent density of 2,590–2,670 kg/m³ (about 162–167 lb/ft³) in the test reports cited here10,22. For other stone, in kg/m³: calcitic marble about 2,690–2,720 and dolomitic marble 2,820–2,8504,5,7; limestone 2,310–2,69010,13; travertine about 1,900–2,50011,34; sandstone 2,397–2,61016,18; slate-type stones 2,730–2,78020,21; quartzite 2,570–2,66032. These are rounded envelopes of selected reports, not limits for every stone of a family. For any real calculation, use the value on the stone's own test report.

Density, specific gravity, specific weight: the terms

Real density and apparent density

A stone is mineral grains plus empty space: pores and microcracks. That gives two densities. Real density is the mass of the solid divided by the volume of the solid alone, pores excluded, so it depends on the minerals: calcite measures 2.71 g/cm³, dolomite 2.86 g/cm³ and quartz 2.65 g/cm³35. Apparent density is "the ratio between the mass of the dry specimen and its apparent volume", the volume inside its outer surface, pores included4. Dry apparent density × actual stone volume estimates the dry mass of a block, slab or tile4.

EN 1936 sets out the European methods for "real density, apparent density, and open and total porosity of natural stone"1.

Open porosity

Open porosity is the volume of pores that water can reach, as a percentage of the apparent volume4. Porosity and mineral composition both affect apparent density. Mineral composition explains why dolomitic marbles test about 110–150 kg/m³ heavier than calcitic marbles from the same Greek region7,35. Porosity is visible inside one family: a Portuguese granite with 2.0 % open porosity tests at 2,590 kg/m³, one with 0.5 % at 2,65010. The cited Portuguese limestones test from 2,310 kg/m³ (12.3 % open porosity) to 2,690 (0.5 %)10.

Specific gravity and specific weight

Specific gravity is density divided by the density of water, so it has no unit. A stone with a specific gravity of 2.6 "is 2.6 times as heavy as water"3. Multiply it by about 1,000 for kg/m³ or by 62.4 for lb/ft³, taking water at roughly 1,000 kg/m³3.

Specific weight, strictly, is weight per unit volume: density × gravitational acceleration (9.81 m/s²). With density in kg/m³ the product is in N/m³; divide by 1,000 for kN/m³, the unit geotechnical papers report. Dry Denizli travertine cores measured 18.73–24.56 kN/m³34. Some trade documents use «specific weight» or «specific gravity» for a density in kg/m³: one laboratory value for Volakas was published as «apparent specific gravity 2825 kg/m3»8. In search, the same idea appears as peso specifico, peso específico, özgül ağırlık and ειδικό βάρος.

What «density» means on a data sheet

Read the units and the test method. A bare 2.7 may be a specific gravity; 2.7 g/cm³ and 2,700 kg/m³ express density3,36. EN 1936 reports dry apparent density in kg/m³; ASTM C97 reports bulk specific gravity, which data sheets may convert to density1,2,3. A US producer sheet, for example, gives «Density ASTM C97 … 163.7 lb/ft3»30. The Baltic Brown report cited below rounds its mean to the nearest 10 kg/m³22.

How density is measured: EN 1936 and ASTM C97

Table 1. The two test methods for the density of dimension stone
EN 1936 (Europe)ASTM C97/C97M (US)
TitleNatural stone test methods – Determination of real density and apparent density, and of total and open porosity1Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone2
Current editionEN 1936:2006, listed as current, committee CEN/TC 2461C97/C97M-182
What it givesReal and apparent density, open and total porosity1Absorption and bulk specific gravity2
Units reportedkg/m³; open porosity in % of volume4,22Specific gravity (no unit), convertible to lb/ft³ or kg/m³3
Specimens6 specimens per stone in a published study4; six 50 mm cubes in one lab report22At least five cubes or cylinders, 2 to 3 inches in size3
Scope noteNatural stone1All dimension stone except slate2

The ASTM test, as the Natural Stone Institute describes it: the specimens are dried in a ventilated oven for 48 hours and weighed, submerged in water for 48 hours and weighed again, and finally weighed suspended in water; comparison with the weight of water gives the specific gravity3. For EN 1936 we read only the catalogue page and reports that apply it, so we do not describe its procedure further1,22.

ASTM sets minimum densities in a separate material specification for each stone3, for example C616 for sandstone and quartzite. A peer-reviewed paper quotes the 1989 edition of C616: quartzites for exterior cladding need an apparent density of at least 2,560 kg/m³32. We could not open licensed copies of the current specifications, so this page gives no other ASTM minimums.

Density of granite, marble and other stone types

Each range below is a rounded envelope of the results cited in its row, all measured by a named method. It is not a limit from a standard, and a quarry outside the range is not unusual.

Table 2. Apparent density by stone type, rounded envelope of the cited results
Stone typekg/m³lb/ft³ (rounded)Reported open porosityExamples testedSources
Marble, calcitic2,690–2,720168–1700.2 % (Thassos Crystallina, Branco Estremoz) to 0.4 % (Dionyssos)Thassos Crystallina, Naxos, Dionyssos, Estremoz, Drama calcitic marbles4,6,7,9,10
Marble, dolomitic2,820–2,850176–1780.7 % (Thassos White)Thassos White, Drama dolomitic marbles5,7
Granite2,590–2,670162–1670.3 % (Baltic Brown) to 2.0 % (Amarelo Vila Real)Baltic Brown, New Balmoral, Kymen Brown, Rosa Mondariz, Portuguese and US granites10,22,23,24,29,30,31
Dark igneous stone sold as «black granite»2,980–3,080186–1920.3 % (Kuru Black, Varpaisjärvi Black)Kuru Black (diorite), Varpaisjärvi Black (diabase)25,26
Limestone2,310–2,690144–1680.36 % (Belgian Blue Stone) to 12.3 % (Semi Rijo do Codaçal)Lioz, Moleanos, Moca Creme, Crema Marfil, Jura Gelb, Belgian Blue Stone10,12,13,14
Travertineabout 1,900–2,500119–156not reported in the cited sourcesTravertino Romano; 56 Denizli cores11,34
Sandstone2,397–2,610150–1632.9 % (Kandla Grey) to 9.53 % (Famennian sandstone)Kandla Grey, Kandla Brown, Belgian Famennian sandstone, a quartzitic sandstone16,17,18,19
Quartzite2,570–2,660160–1660.5–2.5 % (six São Thomé quartzites, NBR 12766)Six quartzites from São Thomé das Letras, Brazil32
Slate-type stone and phyllite2,730–2,780170–1741.6 % (Herbeumont) to 2.2 % (Salm phyllite)Schiste d'Herbeumont, Phyllade de la Salm (Belgium)20,21

The travertine range converts the Denizli unit weights at 9.81 m/s²: 1,909–2,504 kg/m³34.

Figure 1. Apparent density by stone type: rounded envelopes of selected test results, not standard limits.Source: as in the table.

Three patterns stand out. Marble density follows the mineral: the calcitic marbles cluster near calcite's 2.71 g/cm³ and the dolomitic marbles near dolomite's 2.867,35. The cited granites span 2,590–2,670 kg/m³, a range that straddles quartz's density of about 2,650 kg/m³10,22,35. And the two dark igneous stones in this set, sold as «black granite», are 12–16 % denser than a 2,650 kg/m³ granite25,26.

Declared density of named commercial stones

The values below come from four kinds of document, each named in the source list: laboratory test reports, geological-survey identity cards and peer-reviewed papers, producers' declarations and data sheets, and one building-research institute's stone sheets. Each row has one value and one stated method. The passage behind every row is recorded in the evidence file that accompanies this article.

Table 3. Apparent density of 20 named stones, one method per stone, with the document each value comes from
Stone (trade name)What it isOriginkg/m³ (lb/ft³)MethodSource
Thassos Whitedolomitic marbleThassos, Greece2,840 (177.3)EN 19365
Thassos Crystallinacalcitic marblecentral Thassos, Greece2,710 (169.2)EN 19364
Naxos Crystallina Whitecalcitic marbleNaxos, Greece2,710 (169.2)EN 19366
Dionyssos White (Pentelic type)calcitic marbleDionyssos, Attica, Greece2,710 (169.2)EN 19369
Branco Estremozcalcitic marbleÉvora district, Portugal2,710 (169.2)EN 193610
Crema Marfil Cotobiosparite (a limestone), sold as marblenot stated on the sheet2,690 (167.9)UNE-EN 193612
LiozlimestonePero Pinheiro, Sintra, Portugal2,690 (167.9)EN 193610
Belgian Blue Stone (Petit Granit)limestone, despite the nameSoignies, Condroz and Molignée basins, Belgium2,687 (167.7)NBN EN 1936 (1999)14
MoleanoslimestoneAlcobaça, Leiria, Portugal2,600 (162.3)EN 193610
Jura GelblimestoneTreuchtlingen–Eichstätt, Bavaria, Germany2,588 (161.6)NBN EN 1936 (1999)13
Travertino RomanotravertineGuidonia, Rome, Italy2,247 (140.3)EN 193611
Baltic Browngranite (trade group; no petrographic name on the report)Ylämaa, Finland2,670 (166.7)EN 193622
Rosa Mondarizbiotitic graniteO Porriño–Ponteareas area, Spain2,640 (164.8)EN 193629
Elberton GraygraniteElberton, Georgia, USA2,622 (163.7)ASTM C9730
New Balmoralgranite (trade group; no petrographic name on the report)Valkeala, Finland2,620 (163.6)EN 193623
Kashmir Whitegranulite (syenite in the same sheet's microscopy), sold as graniteTamil Nadu, India2,600 (162.3)NBN EN 1936 (1999)15
Kuru BlackdioriteFinland2,980 (186.0)EN 193625
Varpaisjärvi BlackdiabaseVarpaisjärvi, Finland3,080 (192.3)EN 193626
Schiste d'Herbeumontroofing-slate stone, classed by the sheet as a sedimentary argilliteHerbeumont, Ardennes, Belgium2,731 (170.5)NBN EN 1936 (1999)20
São Thomé white quartzitemuscovite quartziteSão Thomé das Letras, Minas Gerais, Brazil2,640 (164.8)NBR 1276632

Values with no stated method, kept out of the table. Volakas, 2,825 kg/m³, from the LITHOS laboratory as transcribed by trade press8. Rosa Porriño, 2,620 kg/m³, and Zimbabwe Black, 3,130 kg/m³, from a UK distributor's sheets that do not state the density method27,28.

Stones we could not document. For Bianco Carrara, the widely hosted technical sheet gives 169.41 lb/ft³ (about 2,714 kg/m³) by ASTM C9737. The same publisher's Botticino Classico sheet repeats its density, absorption, compressive and flexural figures38. We have not established why, so we exclude both sheets pending stone-specific reports. We found no open EN 1936 report for the Absolute Black products we checked.

Why density matters in the trade

Block weight

Dry mass = actual stone volume × apparent density. Example: a squared block of 3.0 × 1.8 × 1.6 m holds 8.64 m³. At 2,710 kg/m³ (a calcitic marble) it weighs 23.4 t. At 2,840 kg/m³ (Thassos White) it weighs 24.5 t. At 2,650 kg/m³ (a granite) it weighs 22.9 t, and at an illustrative 2,250 kg/m³ (a travertine) 19.4 t. If you estimated the Thassos block's weight with a "marble = 2,600" rule of thumb, you would be 2.1 t short.

For an irregular block, use its actual stone volume, not the box drawn around it and not its commercial volume. Under EN 1467, commercial size refers to gross or net size, excludes recognised defects and may include a general reduction for trade, "usually net size dimensions minus 0,05 m"39.

Slab weight per square metre

A slab's dry mass per square metre is its thickness in metres times its density. Example, at four densities:

Table 4. Dry slab mass per m² and per ft² (worked example: thickness × apparent density)
Density2 cm slab, kg/m²3 cm slab, kg/m²2 cm, lb/ft²3 cm, lb/ft²
2,650 kg/m³ (granite)53.079.510.916.3
2,710 kg/m³ (calcitic marble)54.281.311.116.7
2,840 kg/m³ (dolomitic marble)56.885.211.617.5
3,080 kg/m³ (diabase, «black granite»)61.692.412.618.9

Example: a 3.20 × 1.90 m slab (6.08 m²) of 3 cm granite at 2,650 kg/m³ weighs about 483 kg. A bundle of ten such slabs is close to 5 t before the timber and the frame. Our article on stone slab weight gives the figures by stone and thickness, in kg/m² and lb/ft².

Cranes, trucks and containers

These examples estimate dry stone mass; the actual shipping mass also includes any water, resin or backing, and the packing. Stone usually reaches a container's weight limit long before its volume limit. DSV, a forwarder, lists a maximum payload of 25,000 kg for a 20' dry box and 27,600 kg for a 40', adding that specifications vary by manufacturer41. Example: taking 25 t as a nominal ceiling, that is about 460 m² of 2 cm calcitic marble at 54.2 kg/m², or about 314 m² of 3 cm granite at 79.5 kg/m², both before packing. A heavy block raises a second limit: in Hapag-Lloyd's guideline, a load resting on 2 m of a 20' wooden floor is capped at 9.6 t, and on 3 m at 14.4 t42. On that example, a 23 t block needs a checked load-spreading arrangement, or different equipment whose floor rating and securing plan suit the load.

For sea transport, the shipper is responsible for obtaining and documenting the verified gross mass of a packed container44. Under method 2 the shipper weighs all packages and cargo items, including packing and securing material, and adds the container's tare, using a method approved by the competent authority of the State where the container was packed44; the UK, for example, requires approval of a method 2 procedure43. A mass calculated from volume × density, or from a scan, is a dry stone mass and a planning figure, not a verified gross mass; and if it comes from a wrong density, the plan is wrong too.

Selling by the tonne or by the cubic metre

EN 1467 defines commercial dimensions for squared blocks, and says shapeless rough blocks "shall be measured only by mass", in tonnes39. Official statistics also count by mass: the Tuscan chamber of commerce reports Carrara-area block output in tonnes and gives unit values per tonne40. Converting between the two takes one division: price per tonne = price per m³ ÷ density in t/m³. Example: €1,000/m³ is €369/t for a 2.71 t/m³ marble and €352/t for a 2.84 t/m³ dolomitic marble. A buyer who compares offers in different units with the wrong density misreads the gap by about 5 %.

Use the data sheet, not the textbook

Three findings from this research are reasons to use the declared value:

  • Names do not tell you the rock. Belgian Blue Stone (Petit Granit) is a limestone14. Crema Marfil is a biosparite sold as marble12. Kashmir White is a granulite15. A stone traded as «quartzite» was classified by its testing laboratory as a quartz-bearing marble (2,700 kg/m³)33.
  • Families overlap. Dolomitic and calcitic white marbles from the same Greek region differ by 110–150 kg/m³7. The cited Portuguese limestones range from 2,310 to 2,69010.
  • Check the document. Repeated figures on two different stones' sheets are a reason for caution37,38. A full test report, such as the Baltic Brown one, names the laboratory, the date, the number of specimens and the standard22.
Table 5. Density unit conversions (rounded factors unless marked exact)
FromToMultiply by
g/cm³kg/m³1,000 (exact)36
t/m³kg/m³1,000 (exact; 1 t/m³ = 1 g/cm³)36
lb/ft³kg/m³16.018 46 (rounded)36
kg/m³lb/ft³about 0.062 428 (1 ÷ 16.018 46)36
specific gravitykg/m³about 1,000 (water ≈ 1,000 kg/m³)3
specific gravitylb/ft³about 62.43

Example: 2,710 kg/m³ = 2.71 g/cm³ = 2.71 t/m³ ≈ 169.2 lb/ft³ ≈ specific gravity 2.71.

Frequently Asked Questions

What is the density of granite in kg/m³?

In the test results cited here, granite has an apparent density of 2,590–2,670 kg/m³, about 162–167 lb/ft³10,22. Porosity is visible inside the family: a Portuguese granite with 2.0 % open porosity tests at 2,590 kg/m³, one with 0.5 % at 2,65010. Two dark stones sold as «black granite», a diorite and a diabase, test at 2,980 and 3,08025,26. These are rounded envelopes, not limits; for any real calculation, use the stone's own test report.

How much does 1 m³ of granite weigh?

In the tests cited, 1 m³ of granite has a dry mass of 2,590–2,670 kg, and 1 m³ of calcitic marble about 2,690–2,720 kg4,7,10,22; dolomitic marble reaches 2,820–2,8505,7. Dry apparent density × actual stone volume estimates the dry mass4. Example: a squared block of 3.0 × 1.8 × 1.6 m holds 8.64 m³; it weighs 22.9 t at 2,650 kg/m³ (a granite) and 23.4 t at 2,710 kg/m³ (a calcitic marble).

Is granite heavier than marble?

In the cited tests, calcitic marble is slightly denser than the granites listed here: 2,694–2,714 kg/m³ against 2,590–2,670 kg/m³4,7,10,22. Dolomitic marble such as Thassos White (2,840 kg/m³) is denser still5. The two dark igneous stones listed, sold as «black granite», are denser than both: a diorite at 2,980 and a diabase at 3,080 kg/m³25,26. Quartzite overlaps with granite: six Brazilian quartzites tested at 2,570–2,660 kg/m³32.

How much does a granite slab weigh?

Multiply thickness by density. At 2,650 kg/m³, a 2 cm granite slab weighs 53 kg/m² (10.9 lb/ft²) and a 3 cm slab 79.5 kg/m² (16.3 lb/ft²); this is a worked example of dry mass. A 3.20 × 1.90 m slab in 3 cm therefore weighs about 483 kg. The granites cited here range from 2,590 to 2,670 kg/m³, so actual slabs differ by a few percent10,22.

What is the density of marble in kg/m³?

In the reports cited here, calcitic marble tests at about 2,700 kg/m³: Thassos Crystallina, Naxos, Dionyssos and Estremoz all report 2,7104,6,9,10. Dolomitic marble tests at about 2,830: Drama dolomitic marbles at 2,825–2,848 and Thassos White at 2,8405,7. Ask the quarry which type it is, because the difference is close to 5 %.

Is granite heavier than concrete?

Yes. The granites cited here test at 2,590–2,670 kg/m³ (about 162–167 lb/ft³)10,22, and the National Ready Mixed Concrete Association gives 2,240–2,400 kg/m³ (140–150 lb/ft³) for normalweight concrete45. Comparing the ends of the two ranges, dry granite is 8–19% heavier than normalweight concrete for the same volume (our arithmetic; the concrete figures are in-service densities, not dry ones). Structural lightweight concrete is much lighter: the NRMCA gives 90–120 lb/ft³, about 1,440–1,920 kg/m³ (our conversion)45.

What is the difference between density and specific gravity?

Density has units (kg/m³ or lb/ft³). Specific gravity is density divided by the density of water, so it has none. A stone with a specific gravity of 2.7 has a density of about 2,700 kg/m³, or 168.6 lb/ft³3,36. ASTM C97 reports bulk specific gravity; EN 1936 reports apparent density in kg/m³1,2.

Which density should I use to calculate a block's weight?

Use the apparent density from the EN 1936 or ASTM C97 report for that stone and, ideally, that quarry. If an ASTM C97 report gives only bulk specific gravity, multiply it by about 1,000 to get kg/m³ first3; a full report such as the Baltic Brown one names the laboratory, the date and the number of specimens22. Multiply it by the block's actual stone volume, not its commercial volume, which EN 1467 allows to be smaller39. The result is a dry mass.

How Noria Strata handles this

The free block weight calculator does the volume × density calculation in front of you: it shows the formula, a worked example and a note on EN 1936, so you can enter the density from your own test report. For shipments, see the container load tool. Inside Noria Strata, block weights are calculated from material density, and the container planner uses each block's weight from scan and density data to plan the load. That weight is a planning figure: the verified gross mass still comes from an accepted weighing method.

Sources

  1. CEN. EN 1936:2006 Natural stone test methods – Determination of real density and apparent density, and of total and open porosity. Catalogue page (NSAI shop) shop.standards.ie/en-ie/standards/en-1936-2006-346633_saig_cen_cen_792579 · «specifies methods for determining the real density, apparent density, and open and total porosity of natural stone»; status Current; CEN/TC 246
  2. ASTM International. C97/C97M-18 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone. Catalogue page store.astm.org/c0097_c0097m-18.html · scope: «determining the absorption and bulk specific gravity of all types of dimension stone» except slate
  3. Natural Stone Institute (sponsor). The Importance of Testing When Specifying Natural Stone. Continuing-education course, BNP Media, originally published December 2019, page 3 continuingeducation.bnpmedia.com/courses/natural-stone-institute/the-importance-of-testing-when-specifying-natural-stone/3 · «Density can be calculated by multiplying a stone's specific gravity by 62.4 (for lbs/ft3) or 1000 (for kg/m3).»
  4. Laskaridis, K., Arapakou, A., Patronis, M. (2026). The timelessness of Thassos and Naxos heritage ornamental stones. Boletín Geológico y Minero 137(1), 004. DOI 10.21701/bolgeomin/137.1/004 bgm.revistas.csic.es/index.php/bgm/article/download/764/728?inline=1 · «Apparent density, expressed as kg/m3, is the ratio between the mass of the dry specimen and its apparent volume»; Table 1: 2,710 kg/m³ (Thassos Crystallina, Naxos)
  5. Hellenic Survey of Geology and Mineral Exploration, EuroLithos identity card «Thassos White» repository.europe-geology.eu/egdidocs/eurolithos/thassos_white.pdf · «Medium grained snow white dolomitic marble»; apparent density (EN 1936) 2840 kg/m³, open porosity 0.7 %
  6. Hellenic Survey of Geology and Mineral Exploration, EuroLithos identity card «Naxos Crystallina White» repository.europe-geology.eu/egdidocs/eurolithos/naxoscrystallina_white.pdf · «White coarse-grained calcitic marble»; apparent density (EN 1936) 2710 kg/m³, open porosity 0.3 %
  7. Papatrechas, C. (2011). Correlation of physicomechanical properties with grain size and mineralogical composition of the carbonate rocks of Eastern Macedonia (Greece). PhD thesis, Aristotle University of Thessaloniki didaktorika.gr/eadd/handle/10442/26663?locale=en · dolomitic «2,825 kg/m3 to 2,848 kg/m3», calcitic «2,694 kg/m3 to 2,714 kg/m3»
  8. Litos (Publicaciones Litos S.L.). All about Volakas marble from Greece (trade press, quoting the LITHOS laboratory of the Institute of Geology & Mineral Exploration) litosonline.com/en/article/all-about-volakas-marble-greece · «APPARENT SPECIFIC GRAVITY 2825 kg/m3»
  9. Dionyssomarble S.A. Environmental Product Declaration, White Dionyssos marble slabs (3 cm), International EPD System S-P-12416, 2024-05-08 nordia-website.pages.dev/certificates/EPD%20-%203cm%20Dionyssos%20marble%20slab.pdf · «Apparent density kg/m3 2710 EN 1936»; «Calcitic marble»
  10. Carvalho, J., Carvalho, C., Lisboa, V. (2021). EuroLithos Atlas: Ornamental stone resources in Portugal. LNEG repository.europe-geology.eu/egdidocs/eurolithos/eurolithos+atlas+portugal.pdf · identity cards with apparent density and open porosity (EN 1936) for granites, limestones and Estremoz marbles
  11. Lucarini, M., Fumanti, F. (2021). EuroLithos Atlas: Ornamental stone resources in Italy. ISPRA repository.europe-geology.eu/egdidocs/eurolithos/eurolithos+atlas_italy.pdf · Travertino Romano «Lithoid vacuolar travertine», apparent density (EN 1936) 2247 kg/m³
  12. Levantina (Coto). Technical sheet «Crema Marfil Coto», hosted by Worktop Library worktoplibrary.co.uk/wp-content/uploads/2022/06/Crema-Marfil-Marble-Technical-Datasheet.pdf · «Apparent density (Kg/m3) UNE-EN 1936 2690»; «Biosparite» · producer's sheet
  13. Buildwise (Belgian Building Research Institute). NIT 228 stone sheet «Jura Gelb» buildwise.be/media/0lalhtto/jura-gelb-en.pdf · apparent density NBN EN 1936 (juin 1999), 6 specimens, 2588 kg/m³; porosity 4.59 vol.%
  14. Buildwise. NIT 228 stone sheet «Petit Granit» (Pierre bleue de Belgique) buildwise.be/media/mqehyekm/petit-granit-en.pdf · «Roche sédimentaire calcaire»; apparent density 2687 kg/m³, porosity 0.36 vol.%
  15. Buildwise. NIT 228 stone sheet «Granulite blanc-gris de Tamil Nadu» (Kashmir White), CSTC report LMA 4799 (2009) buildwise.be/media/z1jnxxsi/granulite-blanc-gris-de-tamil-nadu.pdf · «Dénomination commerciale Kashmir White»; apparent density, 6 specimens, 2600 kg/m³
  16. Buildwise. NIT 228 stone sheet «Grès gris de Radjasthan» (Kandla Grey) buildwise.be/media/d22h4n30/gr%C3%A8s-gris-de-radjasthan.pdf · apparent density NBN EN 1936, 6 specimens, 2610 kg/m³; porosity 2.9 vol.%
  17. Buildwise. NIT 228 stone sheet «Grès de Radjasthan ocre à brun» (Kandla Brown) buildwise.be/media/jyqiuuvn/gr%C3%A8s-de-radjasthan-ocre-%C3%A0-brun.pdf · apparent density, 6 specimens, 2550 kg/m³; porosity 4.3 vol.%
  18. Buildwise. NIT 228 stone sheet «Grès jaunes décalcifiés du Famennien» buildwise.be/media/0bhh5wlb/gr%C3%A8s-jaunes-d%C3%A9calcifi%C3%A9s-du-famennien.pdf · apparent density, 6 specimens, 2397 kg/m³; porosity 9.53 vol.%
  19. Buildwise. NIT 228 stone sheet «Quartzite de Staneux» (quartzitic sandstone) buildwise.be/media/yejnpqfn/quartzite-en.pdf · «Roche sédimentaire, grès quartzitique»; apparent density 2525 kg/m³
  20. Buildwise. NIT 228 stone sheet «Schiste ardoisier» (Schiste d'Herbeumont) buildwise.be/media/jsjihgk2/schiste-ardoisier-en.pdf · «Roche sédimentaire, argilite»; apparent density, 6 specimens, 2731 kg/m³; porosity 1.6 vol.%
  21. Buildwise. NIT 228 stone sheet «Phyllade gris de la Salm» buildwise.be/media/tv5juo0v/phyllade-gris-de-la-salm.pdf · apparent density, 6 specimens, 2780 kg/m³; porosity 2.2 vol.%
  22. Centro Tecnológico del Mármol (Cehegín, Spain), test report 232936PN004A for LT Granit Oy, «Baltic Brown», 2023-02-23, hosted by the Finnish Natural Stone Association (KIVI) kivi.info/wp-content/uploads/2023/12/Baltic-Brown-LT-Granit-Oy-2023-EN.pdf · «6 cubic specimens of nominal dimensions 50x50x50 mm»; mean apparent density 2670 kg/m³, open porosity 0.3 %; «expressed to the nearest 10 kg/m3»
  23. Centro Tecnológico del Mármol, test report 232938PN004A for LT Granit Oy, «New Balmoral», 2023-02-23 (KIVI) kivi.info/wp-content/uploads/2023/12/New-Balmoral-LT-Granit-Oy-2023-EN-2.pdf · mean apparent density 2620 kg/m³, open porosity 0.4 %
  24. Centro Tecnológico del Mármol, test report 232942PN004A, «Kymen Brown», 2023-03-20 (KIVI) kivi.info/wp-content/uploads/2019/09/Kymi-Brown-Kymen-Granite-Oy-2023-EN.pdf · mean apparent density 2620 kg/m³
  25. Centro Tecnológico del Mármol, test report 232970PN004A for Tampereen Kovakivi Oy, «Kuru Black», petrographic definition «Diorite», 2023-07-01 (KIVI) kivi.info/wp-content/uploads/2023/12/Kuru-Black-Tampereen-Kovakivi-Oy-2023-EN.pdf · mean apparent density 2980 kg/m³, open porosity 0.3 %
  26. Centro Tecnológico del Mármol, test report 232961PN004A for Loimaan Kivi Oy, «Varpaisjärvi Black», petrographic definition «Diabase», 2023-06-07 (KIVI) kivi.info/wp-content/uploads/2023/12/Varpaisjarvi-Black-Loimaan-Kivi-Oy-2023-EN.pdf · mean apparent density 3080 kg/m³, open porosity 0.3 %
  27. Hardscape Products Ltd. Test data «Rosa Porrino», certificate dated 01/12/2025 (distributor's sheet) hardscape.co.uk/wp-content/uploads/2023/09/Rosa-Porrino-Granite-Test-Data.pdf · «Density (Kg/m3): 2620»; no method given beside the density
  28. Hardscape Products Ltd. Test data «Zimbabwe Black», certificate dated 08/12/2025 (distributor's sheet) hardscape.co.uk/wp-content/uploads/2023/09/Zimbabwe-Black-Granite-Test-Data-1.pdf · «Density (Kg/m3): 3130»; no method given beside the density
  29. Instituto Geológico y Minero de España, EuroLithos identity card «Rosa Mondariz» repository.europe-geology.eu/egdidocs/eurolithos/112.pdf · «Coarse grained biotitic granite»; Pontevedra, O Porriño area; apparent density (EN 1936) 2640 kg/m³
  30. Polycor. Spec sheet «Elberton Gray» granite polycor.com/wp-content/uploads/2026/03/Elberton-Gray_Granite_SpecSheet_EN.pdf · «Density ASTM C97 … 163.7 lb/ft3 2 622.22 kg/m3»; «quarried in Elberton, Georgia» · producer's sheet
  31. Polycor. Spec sheet «White Mount Airy» granite polycor.com/wp-content/uploads/2023/03/White-Mount-Airy-Granite_Granite_SpecSheet_EN-1.pdf · «Density ASTM C97 164.00 lb/ft3 2 634.00 kg/m3» · producer's sheet
  32. Fernandes, T.M.G., Godoy, A.M., Fernandes, N.H. (2003). Aspectos geológicos e tecnológicos dos quartzitos do centro produtor de São Thomé das Letras (MG). Geociências (UNESP) 22(2), 129–141 revistageociencias.com.br/geociencias-arquivos/22_2/3.pdf · Table 2 «Massa Específica Ap. Seca (ABNT - NBR 12.766/92) (Kg/m3) 2.640» (Branco); range «2.570 a 2.660 Kg/m3»
  33. SGS-CSTC Standards Technical Services (Xiamen). Test report XMCCM161201715, 2017-07-18, commercial name «Quartzite», hosted by Groupe Samse medias.groupe-samse.fr/Fiche_technique/Fiche_technique_681369.pdf · «Petrographic Name : QUARTZ-BEARING MARBLE»; «Apparent density EN 1936:2006 2700 kg/m3»
  34. Çelik, S.B., Çobanoğlu, İ. (2019). Denizli travertenlerinde P ve S dalga hızları ile bazı fiziksel ve tek eksenli sıkışma dayanımı özellikleri arasındaki ilişkilerin araştırılması. Politeknik Dergisi 22(2), 341–349. DOI 10.2339/politeknik.444370 dergipark.org.tr/en/download/article-file/507653 · 56 cores; dry unit weight «18.73 ile 24.56 arasında», mean «23.15 kN/m3» (gloss: between 18.73 and 24.56)
  35. Anthony, J.W., Bideaux, R.A., Bladh, K.W., Nichols, M.C. (eds.). Handbook of Mineralogy. Mineralogical Society of America: calcite, dolomite, quartz handbookofmineralogy.org/pdfs/calcite.pdf handbookofmineralogy.org/pdfs/dolomite.pdf handbookofmineralogy.org/pdfs/quartz.pdf · «D(meas.) = 2.7102(2)» (calcite); «D(meas.) = 2.86» (dolomite); «D(meas.) = 2.65» (quartz)
  36. NIST. Guide for the Use of the International System of Units (SP 811), Appendix B.9 nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9 · pound per cubic foot to kg/m³ «1.601 846 E+01»; g/cm³ to kg/m³ «1.0 E+03»
  37. Marmi e Graniti d'Italia (Sicilmarmi), technical data sheet «Bianco Carrara C – C/D», hosted by ICE Italian Trade Agency ice.it/en/my-home/repository/vetrine/366048/1593201706.3362.pdf · «Density, lbs/ft3, (kg/m3) 169.41 C97»; «Absorption by weight, % 0.1»
  38. Marmi e Graniti d'Italia (Sicilmarmi), technical data sheet «Botticino Classico», hosted by ICE ice.it/en/my-home/repository/vetrine/366048/1593201706.3515.pdf · «Density, lbs/ft3, (kg/m3) 169.41 C97»; «Absorption by weight, % 0.1»; compressive 10,930 psi and flexural 2,799 psi, as in [37]
  39. CEN. EN 1467:2022 Natural stone – Rough blocks – Requirements (published preview, SIST EN 1467:2022) cdn.standards.iteh.ai/samples/72591/b25b7404e3cb4139b24cb91ca3cfd48c/SIST-EN-1467-2022.pdf · «refers either to gross or net size and excluding recognized defects»; «usually net size dimensions minus 0,05 m»; «shapeless rough blocks shall be measured only by mass»
  40. Camera di Commercio della Toscana Nord-Ovest (2026-01-14). II° Rapporto Osservatorio Marmo tno.camcom.it/sites/default/files/sala_stampa/2026-01/20260114-presentazione-Osservatorio%20del%20marmo%20anno%202025.pdf · «estratte 600 mila tonnellate di marmo in blocchi» (gloss: 600 thousand tonnes of marble extracted in blocks); unit values per tonne
  41. DSV. Dry container dimensions dsv.com/en/our-solutions/modes-of-transport/sea-freight/shipping-container-dimensions/dry-container · 20': «Max payload 25,000 kg»; 40': «Max payload 27,600 kg»; specs «may vary depending on the container manufacturer» · forwarder
  42. Hapag-Lloyd. Weight distribution in containers for safe transport (guideline) hapag-lloyd.com/content/dam/website/downloads/pdf/Weight_distribution_guideline_03.pdf · «the maximum weight of the cargo depends on the length that it rests on the container floor»; 20' wooden floor 2 m 9.6 t, 3 m 14.4 t · carrier
  43. UK Maritime and Coastguard Agency, GOV.UK (2016). Verified gross mass of containers gov.uk/government/publications/verified-gross-mass-of-containers · «A shipper using method 2 must have their method approved by the MCA.»
  44. International Maritime Organization (2014). MSC.1/Circ.1475, Guidelines regarding the verified gross mass of a container carrying cargo wwwcdn.imo.org/localresources/en/OurWork/Safety/Documents/MSC.1%20Circ.1475.pdf · «The responsibility for obtaining and documenting the verified gross mass of a packed container lies with the shipper.»
  45. National Ready Mixed Concrete Association (2003, 2016). CIP 36: Structural Lightweight Concrete (Concrete in Practice series) nrmca.org/wp-content/uploads/2021/01/36pr.pdf · «normalweight concrete with a density in the range of 140 to 150 lb/ft3 (2240 to 2400 kg/m3)»

How to cite this article

Konstantinou, M. (2026). Density and specific weight of stone: marble, granite, limestone. Noria Strata. https://www.noriastrata.com/en/blog/density-specific-weight-natural-stone

The author

Maria KonstantinouCTO, Noria Strata

  • stone density
  • apparent density
  • EN 1936
  • block weight
  • slab weight
  • marble
  • granite